What is physical stock verification?
Physical stock verification (stock audit) meaning: counting the stock actually held and comparing it with the stock records, then correcting and reporting the differences.
Physical stock verification is the count of the stock actually held in a warehouse or store, compared with the quantities in the stock records. It is also called a stock audit or stock take. Differences are investigated, explained and corrected in the books, and the results are reported to management and, for many companies, to the statutory auditor.
Banks also use “stock audit” for checking a borrower’s stock against the stock statements given for a loan. This page is about verifying stock in your own warehouse.
How physical stock verification works in an Indian D2C or omnichannel warehouse
Full count vs cycle count
| Full physical verification | Cycle count | |
|---|---|---|
| What is counted | Every item in the warehouse | A planned slice of bins or SKUs each day or week |
| How often | Usually once or twice a year, often at year end | Continuously, through the year |
| Operations | Picking and receiving often pause during the count | The warehouse keeps working |
| Used for | Year-end books and the audit | Catching errors early |
Many warehouses do both: cycle counts through the year, and a full verification at year end.
The procedure
- Plan. Fix the date, the scope (all locations, including returns, damaged stock and stock at third-party warehouses) and who counts which area.
- Freeze movements. Stop or record receipts and dispatches during the count, so the records don’t move while you count.
- Count. Count bin by bin location, ideally blind, without showing the counter the system quantity. Note the batch or lot and expiry where it matters.
- Recount differences. A second person recounts bins where the count and the record don’t match.
- Investigate. Look for causes: unrecorded receipts or returns, mispicks, items in the wrong bin, damage or theft.
- Adjust and approve. Post the approved differences as stock adjustments, so the books match the shelves.
- Report. Record the count sheets, the differences by item and value, the reasons and the sign-offs.
Example: one SKU, one count. All numbers are illustrative.
- The stock record shows 500 units of a shampoo SKU across three bins. The full count finds 486.
- The recount confirms 486. Investigation finds 10 units in a returns crate that was never put away, and 4 units damaged and not written off.
- The 10 units are put back in their bin. The 4 damaged units are written off with an approved stock adjustment.
- Records now show 496 good units and the shelves agree (486 + 10 = 496).
A simple report format
| SKU | Location | Book quantity | Counted quantity | Difference | Unit cost (₹) | Value of difference (₹) | Reason | Approved by |
|---|
Common mistakes
- Counting while stock moves, so receipts or dispatches during the count create false differences.
- Showing counters the expected quantity, which leads people to confirm the number instead of counting.
- Forgetting stock outside the main racks: returns waiting for QC, damaged goods, stock at a 3PL or at marketplace fulfilment centres.
- Adjusting without finding the cause, so the same difference comes back at the next count.
Related metrics
- Variance % = (counted quantity − book quantity) ÷ book quantity × 100. Example: (486 − 500) ÷ 500 = −2.8%.
- Variance value = difference in units × unit cost. Example: 4 damaged units × ₹250 = ₹1,000 written off.
- Location match rate = bins where the count matches the record ÷ bins counted × 100. Example: 1,940 of 2,000 = 97%.
- Inventory shrinkage = stock lost to damage, theft or error ÷ book stock × 100, usually tracked by value.
Physical stock verification in the Indian context
- Statutory audit (CARO 2020). The Companies (Auditor’s Report) Order, 2020 (Ministry of Corporate Affairs, S.O. 849(E), 25 February 2020) asks the auditor to report “whether physical verification of inventory has been conducted at reasonable intervals by the management” and “whether any discrepancies of 10% or more in the aggregate for each class of inventory were noticed and if so, whether they have been properly dealt with in the books of account” (paragraph 3(ii)(a)). The Order excludes some companies, including small companies and one person companies.
- Year-end counts. Most Indian companies close their books on 31 March, so many run a full count around that date and have their auditors observe it.
- Stock in many places. A D2C brand’s stock may sit in its own warehouse, at a 3PL, in marketplace fulfilment centres and in dark stores. Each location needs a count or a confirmation from whoever holds the stock.
- Bank stock audits. Businesses with working-capital loans may also face a stock audit by the lender, which compares stock with the stock statements given to the bank.
How Fretron CommerceOS fits
Fretron CommerceOS is order, warehouse and shipping software for Indian D2C, retail and omnichannel consumer brands.
Bin-level accuracy is live in the Fretron CommerceOS warehouse module. Cycle counts in Fretron CommerceOS are blind counts taken on the phone and posted from the office, not updated with each scan. Stock adjustments can be recorded in the warehouse module. Stock changes are kept in a stock ledger.
Questions and answers
- What is physical stock verification?
- Physical stock verification is counting the stock actually held and comparing it with the stock records. Differences are recounted, investigated and corrected in the books with approved adjustments. It is also called a stock audit or stock take, and many companies do a full verification at least once a year, usually around the financial year end.
- What is the difference between physical stock verification and a stock audit?
- In a warehouse, the two terms usually mean the same thing: counting stock and comparing it with the records. "Stock audit" can also mean a check by an outside party, such as the statutory auditor observing the count or a bank checking a borrower's stock against the stock statements given for a loan.
- What is the procedure for physical verification of inventory?
- Plan the date and scope, freeze or record stock movements, and count bin by bin, ideally without showing the counter the system quantity. Recount any differences, investigate their causes, then post approved stock adjustments so the books match. Keep count sheets, a variance report with reasons, and the sign-offs for management and the auditor.
- How often should physical stock verification be done?
- Many companies do a full count at least once a year, around the 31 March year end, and some do it every half year. CARO 2020 asks auditors to report whether management verified inventory at reasonable intervals. Warehouses that run cycle counts through the year find fewer surprises at the full count.
- What does CARO 2020 say about physical verification of inventory?
- Paragraph 3(ii)(a) of the Companies (Auditor's Report) Order, 2020 asks the auditor to report whether management conducted physical verification of inventory at reasonable intervals, and whether discrepancies of 10% or more in the aggregate for each class of inventory were found and properly dealt with in the books. Some companies, including small companies, are excluded.
- What is the difference between physical stock verification and a cycle count?
- Physical stock verification usually means a full count of every item, often once a year, with operations paused. A cycle count checks a planned slice of bins or SKUs each day or week while the warehouse keeps working. Cycle counts catch errors early; the full count gives a complete year-end figure for the books and the audit.
- What should a physical stock verification report include?
- For each SKU and location: the book quantity, the counted quantity, the difference in units and value, the reason found and who approved the adjustment. Add a summary by product class with total differences, the date and scope of the count, who counted, and the stock not counted, such as goods held at a 3PL or in transit.
- How do you handle differences found in a stock count?
- Recount first, because many differences are counting mistakes. Then look for unrecorded receipts or returns, items in the wrong bin, mispicks, damage and theft. Correct records only with an approved adjustment and a reason, and track repeated causes so the process is fixed, not just the number.
Last reviewed: by Fretron.
Sources
The procedure, report format and metrics are general practice; the example uses illustrative numbers.
- Companies (Auditor's Report) Order, 2020. Ministry of Corporate Affairs, Order S.O. 849(E), 25 February 2020, Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii); paragraphs 1(2) and 3(ii)(a). Primary source: https://www.mca.gov.in/Ministry/pdf/Orders_25022020.pdf. Access copy: Internet Archive capture of that URL, 29 Dec 2020, https://web.archive.org/web/20201229035629/http://mca.gov.in/Ministry/pdf/Orders_25022020.pdf (accessed 5 Nov 2026; mca.gov.in returned HTTP 403 that day).