How to run FEFO: batch and expiry management for D2C brands in India
Updated:
FEFO (first expiry, first out) means the stock that expires first goes out first, ahead of later-dated stock of the same SKU. To run it, record the batch number and expiry date of every unit at receipt, reserve orders against the earliest-expiring stock that meets the buyer's shelf-life terms, and review near-expiry stock every week.
FIFO or FEFO?
- FIFO (first in, first out) sends out the oldest receipt first. It suits goods that don't expire, such as apparel and electronics.
- FEFO (first expiry, first out) sends out the earliest expiry date first, whatever order the stock arrived in. It suits food, beverages, cosmetics, supplements and personal care, where two receipts can carry different expiry dates.
- A newer receipt can expire sooner than an older one. Under FIFO that newer stock waits and ages; under FEFO it goes first.
More on FIFO and FEFO and batch and lot tracking.
Where FEFO breaks in a D2C warehouse
- Dates aren't captured at receipt. If the GRN records only the SKU and quantity, no later step can tell one batch from another.
- Batches are mixed in one bin. Pickers take whatever is at the front.
- Returns go back without a batch. A returned unit with no batch and expiry recorded breaks the count for that SKU.
- Buyers have shelf-life terms. A unit that is fine for your own store may be refused by a marketplace or modern-trade buyer.
- Expiry is checked too late. Near-expiry stock is found at a stock count, when it's too late to sell it at full price.
How to run FEFO, step by step
- Record batch and expiry at receipt. Capture the batch or lot number and the expiry date on the GRN for every inbound line, from the supplier's label or barcode. Stock without dates can't be allocated by expiry.
- Keep one batch per bin where you can. When two batches must share a bin, label which is which.
- Reserve by expiry date when you allocate. Assign each order the earliest-expiring stock that still meets that buyer's shelf-life terms.
- Make sure the reserved stock is the stock that leaves. Train pickers to pick the reserved batch and check it at packing.
- Record batch and expiry on returns. Inspect each returned unit and record its batch and expiry before it goes back to sellable stock.
- Review near-expiry stock every week. Decide early whether to push it through your own store, bundle it, mark it down or write it off.
Shelf-life terms from marketplaces and buyers
Marketplaces, quick-commerce platforms and modern-trade buyers often set a minimum remaining shelf life for the stock they accept. The rules differ by platform and category, and they change. Keep each buyer's current terms to hand, and check stock against them before you allocate an order to that channel.
Batch and expiry in Fretron CommerceOS
Fretron CommerceOS is order, warehouse and shipping software for Indian consumer brands, running orders, warehouse and delivery on one live record beside your ERP. There is no prebuilt ERP connector. ERP data moves through Fretron's REST API, webhooks or CSV, with the mapping set up per customer.
Stock is tracked by batch and expiry date, and orders can be reserved first-expiry-first-out (FEFO) when they are allocated. Batch and expiry dates have to be recorded at receipt for FEFO to apply, expiry notices are shown in the app only, and short-dated stock can still be shipped.
- Orders are confirmed and allocated per facility, with stock reserved first-in-first-out or first-expiry-first-out (FIFO/FEFO).
- Stock is held on one on-hand ledger, with reservations, batches and serial numbers recorded on it.
- Inbound stock is received against the ASN with a GRN, and QC can accept or reject each piece and quarantine it.
- A stock hold takes the held stock out of what's offered for sale.
- Each marketplace location is mapped to the facility that fulfils it.
Picking.
- Pickers scan the bin, then the item or serial.
Order, allocation, pick and dispatch share one record — no hand-off integration to break.
Frequently asked questions
- What is the difference between FIFO and FEFO?
- FIFO (first in, first out) ships the oldest receipt first. FEFO (first expiry, first out) ships the earliest expiry date first, whatever order the stock arrived in. FEFO suits food, cosmetics, supplements and personal care, where two receipts of the same SKU can carry different expiry dates.
- What do we need to record at receipt to run FEFO?
- The batch or lot number and the expiry date for every inbound line, taken from the supplier's label or barcode at goods receipt. Record the quantity per batch and put each batch in a known bin. Stock received without dates can't be allocated by expiry later.
- How do shelf-life terms from marketplaces affect FEFO?
- Marketplaces, quick-commerce platforms and modern-trade buyers often set a minimum remaining shelf life for the stock they accept, and the rules differ by platform and category. Under FEFO, reserve the earliest-expiring stock that still meets each buyer's current terms, and send shorter-dated stock to channels that accept it.
- Does Fretron CommerceOS support FEFO?
- In Fretron CommerceOS, stock is tracked by batch and expiry date, and orders can be reserved first-expiry-first-out (FEFO) when they are allocated. Batch and expiry dates have to be recorded at receipt for FEFO to apply, expiry notices are shown in the app only, and short-dated stock can still be shipped.
- Does picking in Fretron CommerceOS follow FEFO?
- In Fretron CommerceOS, picking is directed, so the walking path and pick sequence are optimised and FEFO/FIFO rules are followed automatically.
- What should a brand do with near-expiry stock?
- Review it every week, not at the stock count. Depending on how much shelf life is left, sell it through your own store, use it in bundles or samples, mark it down, or write it off before it takes up space and working capital.
- Can warehouse teams pick and pack on phones with Fretron CommerceOS?
- Your warehouse team works the floor on a phone — fifteen scan stations from gate entry to dispatch handover. No handheld hardware required. There is no printing from the phone and no iOS app. Picking can run single-order, batch, cluster or zone, and orders can be grouped into scheduled waves.