How to lay out an ecommerce warehouse
Updated:
Lay out an ecommerce warehouse in the order stock moves through it: receiving, a QC and quarantine area, reserve storage, a forward pick area, packing, dispatch staging and a separate returns area. Put the SKUs that are picked most often closest to the pack benches, keep inbound and outbound traffic from crossing, and give every bin a location code with a barcode so each move can be scanned and recorded. For a small D2C warehouse, a U-shaped flow, with receiving and dispatch on the same side of the building, is often the simplest place to start.
The zones an ecommerce warehouse needs
List the zones before you draw anything. Each one has a job, and stock should move between them in one direction.
- Gate and receiving. Where deliveries are logged, unloaded and counted against the ASN and purchase order. Leave floor space to hold a full delivery while it is counted. See receiving and putaway.
- QC and quarantine. A marked area for stock waiting for QC, and a separate one for rejected or damaged stock, so neither is picked by mistake.
- Reserve storage. Full cases and pallets, usually on racking, that refill the pick area. Slow movers can be picked from here.
- Forward pick area. Shelving or flow racks holding a small working quantity of the fastest-moving SKUs, refilled from reserve. See replenishment.
- Packing. Pack benches with cartons, mailers, tape and a scanner at each bench, placed between the pick area and dispatch.
- Dispatch staging. Marked lanes where packed orders wait for pickup, one lane per courier or marketplace pickup, so each handover can be counted against its manifest. See shipping manifest.
- Returns. A separate area for customer returns and RTO parcels, away from sellable stock, where each return is checked before it goes back to a bin. See returns processing.
- Consumables and exceptions. Packing material, printers and the desk where problem orders are handled, placed so they don't block the main flow.
Which flow suits your building
| Layout | How stock moves | Suits | Watch for |
|---|---|---|---|
| U-shaped | Receiving and dispatch sit on the same side; stock moves in, round the building and back out | Small and mid-sized D2C warehouses with one loading side | Inbound and outbound share a dock area, so schedule deliveries away from courier pickup times |
| I-shaped (straight-through) | Receiving on one side, dispatch on the opposite side; stock moves in a straight line | Larger, high-volume buildings with doors on two opposite sides | A longer walk back from dispatch to receiving for people and equipment |
| L-shaped | Receiving and dispatch on two adjoining sides | Buildings with doors on adjoining walls, or where inbound and outbound traffic must be kept apart | The corner can become dead space; plan the turn in the flow |
Whichever you choose, trace the path one order takes from bin to vehicle and check that it never doubles back through receiving or returns.
Where to put each SKU (slotting)
- Rank SKUs by how often they are picked, not by revenue. Count order lines per SKU over a recent period that includes a sale event, then group them into A, B and C. See ABC analysis.
- Put A items in the golden zone. That is the shelf height between a picker's waist and shoulders, in the bays nearest the pack benches.
- Keep look-alikes apart. Sizes and colours of one style, or variants of one product, are easy to mix up when they sit side by side. Separate them, or mark the bins clearly.
- Keep heavy and bulky items low and near dispatch. They are the hardest to carry, so they should travel the shortest distance.
- Give every bin a location code. A code for aisle, bay, level and position, shown as a barcode on the bin, lets a picker scan the bin as well as the item. See bin location.
- Review slotting before peaks. The sales mix shifts before festive and marketplace sale events; move the new fast movers forward before the sale starts, not during it. See sale-day picking and packing.
Layout choices specific to ecommerce in India
- Plan staging around pickup cut-offs. Each marketplace sets its own dispatch deadline, and each courier collects at its own time. Staging lanes by courier and channel let the team see what is still due before each pickup. See marketplace dispatch deadlines.
- Size the returns area from your own numbers. Return and RTO volumes differ by category and payment mode, so size the returns area from your own return and RTO rates, not from another brand's. See RTO.
- Give B2B and quick-commerce orders their own lane. Case-quantity orders for quick-commerce or modern-trade purchase orders need carton or pallet staging that single-unit ecommerce orders don't. See B2B and D2C orders from one warehouse.
- Leave room for extra pack benches. On sale days the pack area has to absorb the peak. Mark the floor space and power points for temporary benches before the sale.
How to plan or change a layout, step by step
- Measure the work. Orders and order lines per day on a normal day and on your biggest sale day, units per order, and the share shipped through each channel.
- Rank your SKUs. Run ABC analysis on order lines picked, as above.
- Map the building. Doors, docks, columns, ceiling height, floor load, power points and fire exits, drawn to scale.
- Choose the flow. U-shaped, straight-through or L-shaped, based on where the doors are.
- Choose storage for each zone. Shelving or flow racks for picking single units, pallet racking for reserve stock, and bins sized to the products in them.
- Size the aisles. Set aisle widths for the trolleys, pallet trucks or forklifts you use, and follow your local fire and building safety rules and your insurer's requirements.
- Code and label every location. Give each bin its location code and barcode before any stock moves in.
- Test it with real orders. Walk a day's pick lists through the plan, or move one zone first, and adjust before moving everything.
- Review it after the first peak. Check where pickers walked furthest and where orders waited, and move SKUs or benches to match.
Common layout mistakes
- Slotting by revenue. A high-value SKU that sells rarely doesn't need the best shelf; the SKU that is picked all day does.
- Packing far from the fast movers. Every pick then ends with a long walk.
- Returns handled in the sellable area. Unchecked returns end up in pick bins and ship again as damaged or wrong items.
- No staging space. Packed orders pile up in the aisles, and handovers to the courier are missed or miscounted.
- Bins without location codes. Stock can only be found by the people who remember where it is.
- Designing for an average day. The layout has to work on your biggest sale day, not only on a normal one.
How Fretron CommerceOS fits a warehouse layout
Fretron CommerceOS is order, warehouse and shipping software for Indian D2C, retail and omnichannel consumer brands.
Scanning on the floor. Your warehouse team works the floor on a phone — fifteen scan stations from gate entry to dispatch handover. No handheld hardware required.
Putaway. Putaway is directed to zone-compliant bins by product type.
Picking. Pickers scan the bin, then the item or serial. Picking can run single-order, batch, cluster or zone, and orders can be grouped into scheduled waves.
Packing and handover. Each piece is scanned at the pack bench before the carton is closed, and cartons are scanned to the courier manifest at handover.
Returns. Returns come back through QC on the same record, with the disposition decision captured per line.
Stock. Stock is held on one on-hand ledger, with reservations, batches and serial numbers recorded on it.
Frequently asked questions
- What is the best layout for a small ecommerce warehouse?
- There isn't one best layout; it depends on where your doors are and how many orders you ship. For a small D2C warehouse with one loading side, a U-shaped flow is often the simplest: receiving and dispatch share one side, stock moves round the building, and the fastest-moving SKUs sit next to the pack benches. Larger buildings with doors on opposite sides often suit a straight-through (I-shaped) flow.
- What zones does an ecommerce warehouse need?
- An ecommerce warehouse typically needs a receiving area, a QC and quarantine area, reserve storage, a forward pick area for fast movers, pack benches, dispatch staging lanes and a separate returns area. Packing material and an exceptions desk sit off the main flow.
- Where should fast-moving SKUs go in a warehouse?
- Put the SKUs that are picked most often in the forward pick area, at the height between a picker's waist and shoulders, in the bays nearest the pack benches. Rank SKUs by order lines picked, not by revenue, and review the ranking before each sale event.
- Should returns have their own area in the warehouse?
- Yes. Customer returns and RTO parcels should be received in a separate area, away from sellable stock, and checked before they go back to a bin. Otherwise unchecked returns can end up in pick bins and ship again.
- How often should you review a warehouse layout?
- Review slotting before each major sale event, whenever your best-sellers change, and after each peak, using where pickers walked furthest and where orders waited. Review the whole layout when order volume, the channel mix or the building changes.
- Do you need a WMS to run a warehouse layout?
- A layout run from memory works only while the same people stay. A warehouse management system (WMS) records which bin each unit is in, so stock can be found by scanning and slotting can change without losing track of it. See how to choose a WMS.
- How does Fretron CommerceOS fit a warehouse layout?
- Fretron CommerceOS is order, warehouse and shipping software for Indian D2C, retail and omnichannel consumer brands. Putaway is directed to zone-compliant bins by product type. Pickers scan the bin, then the item or serial. Stock is held on one on-hand ledger, with reservations, batches and serial numbers recorded on it.